We use cookies to improve your online experience. To accept these cookies continue browsing as normal. Read our cookies policy here for more information

Internet Prices with Showroom Expertise
Call today on 01524 841087

You have no items in your basket.

Phoenix Crystal Amanzonite Bath 160 x 75 BH070

Phoenix Crystal Amanzonite Bath 1600 x 750mm Whirlpool / Airpool Options BH070S1

RRP £801.00

Our Price £560.70
Need to ask a question ? 01524 841087 Call: Delivery 3-5 Working Days

Available Options:

* Required Fields



Code BH070
Dimensions L160 x W75 x D41
Capacity 170 litres

Phoenix have spent over 30 years designing and perfecting their Whirlpool systems.

This has resulted in reducing the amount of problems people have previously suffered with Whirlpool baths.

The Phoenix V-JET system ensure that the bath is fully drained every time. The Dry-Run Pump Protection prevents the system from running without water.

All airpool jets are made from chrome plated SOLID BRASS! Attractive and robust, they are fitted with non return valves which minimises water flow back - this means your system is not stting with unseen water while the bath is not in use.

You can control your airpool system with the variable 3 speed blowers, which means you can switch from a soothing ripple to an invigorating blast.

An optional inline heater can be added at the time of order to mantain water temperature.

Really want the ultimate experience? Add the Colour Kinetic Lights - these change through 7 colours , or can be selected to display your favourite colour. All contributing to the perfect relaxing soak.

Do not be put off by an overwhelming amount of information - it really is very simple. 

Below are the 3 Systems available:

Whirlpool System 1
On/Off Switch
2 x Air Flow Controls
Directional Whirlpool Jets
Back & Foot Jets
Safety Suction Filter
Dry Run Pump Protection

Optional Extras - Inline Heater, Kinestic Underwater Lights, ELCB Protection

Airpool System 2
On/Off Switch
Airspa Jets

Optional Extras - Kinestic Underwater Lights, ELCB Protection

Whirlpool System 3
On/Off Switch for Whirlpool
On/Off Switch for Airpool
2 x Air Controls
Directional Jets
Back & Foot Jets
Aispa Jets
Safety Suction Filter
Dry Run pump Protection

Optional Extras - Inline Heater, Kinetic Underwater Lights, ELCB Protection


Supply requirements - 240v, 13amp, live, neutral, earth. Wiring must comply with all regulations for electrical wiring as published by the institute of Electrical Engineers. The supply must be via an earth leakage circuit breaker/residual current device (ELCB, RCD, RCCB) rated at 20amp minimum with a 30milliamp trip current. The supply should be installed on a switched fused spur which, together with the RCD, should be fitted outside the room where the bath is installed.

If an Inline Heater is fitted the electrical rating is 1.5 KW Each individual pump/blower or optional extra (light & Inline heater) all have a separate electrical cable to supply the power.

Make sure that all cables are connected via an IP55 rated junction box.

There is no need to remove either the motor terminal block cover, the timer control box cover (if fitted), or the electronic control box cover (if fitted). Doing so without authorisation from Phoenix Whirlpools Ltd will invalidate the warranty.

The supply should be checked to ensure earthing is in existence and is satisfactory.

The above are general guidelines for Phoenix Whirlpool baths and the full installation instructions should be followed.

Additional Information

Delivery Time No
Product Category No